1-708-754-9488
All Salvageable Parts Available for Purchase
At Midwest Moto Parts, we specialize in high-quality used motorcycle parts, and we are excited to announce that we have just begun the disassembly of a 2010 Honda Fury VT1300CX. Every salvageable component from this incredible cruiser will be made available for purchase in our store and online. If you’re looking for authentic used Honda motorcycle parts, this is your chance to get premium components at good prices. You can browse our inventory and shop now at Midwest Moto Parts.
About the 2010 Honda Fury VT1300CX – A Revolutionary Chopper
The Honda Fury VT1300CX was Honda’s bold entry into the factory-custom chopper market. First introduced in 2009, this bike combined the raw appeal of a custom chopper with Honda’s legendary reliability. It featured radical styling, a long raked-out front end, and a 21-inch front wheel, making it one of the most striking motorcycles in Honda’s lineup.
Key Specifications of the 2010 Honda Fury VT1300CX:
- Engine: 1,312cc liquid-cooled, 52-degree V-twin
- Horsepower: Approximately 57 hp
- Torque: 78 lb-ft
- Fuel System: PGM-FI (Programmed Fuel Injection)
- Transmission: 5-speed manual
- Final Drive: Shaft drive
- Frame: High-tensile steel, double-cradle design
- Rake Angle: 38 degrees
- Wheelbase: 71.2 inches
- Seat Height: 26.7 inches
- Fuel Capacity: 3.4 gallons
- Weight: 663 lbs (wet)
Production and Popularity of the Honda Fury
Honda manufactured the VT1300CX Fury for the North American and international markets. The bike was produced from 2009 to 2022, marking over a decade of production. Although Honda has not released official production numbers, estimates suggest tens of thousands of units were sold worldwide. The Fury gained a cult following among cruiser enthusiasts who wanted a custom-styled bike with Honda’s dependability.
This model stood out because it was one of the first mass-produced choppers from a major motorcycle manufacturer. It eliminated the headaches associated with custom-built bikes while delivering exceptional performance, smooth handling, and easy maintenance.
Parts Now Available from Our 2010 Honda Fury VT1300CX Disassembly
We are meticulously dismantling this 2010 Honda Fury VT1300CX to ensure that each usable part is cleaned, inspected, and listed for sale. Here are some of the key OEM parts we are offering:
1. Engine Components
- Complete 1312cc V-twin internal individual parts
- Cylinder heads, pistons, camshafts, and valves
- Carburetor/throttle body assembly
- Oil pump, starter motor, and alternator
2. Transmission and Drivetrain Parts
- OEM 5-speed transmission assembly
- Clutch components and primary drive gears
- Shaft drive and final drive housing
3. Frame and Suspension Parts
- Front forks, triple trees, and steering stem
- Rear mono-shock suspension system
4. Wheels and Brakes
- OEM Honda 21-inch front wheel and 18-inch rear wheel
- Front and rear brake calipers with master cylinders
- Brake rotors and lines
5. Bodywork and Aesthetic Components
- OEM Honda Fury fuel tank with factory paint
- Front and rear fenders
- Side covers, frame covers, and decorative trim pieces
6. Electrical System and Controls
- Complete wire harness and ECU
- Ignition coils, regulator/rectifier, and starter relay
- Handlebar controls, switches, and grips
7. Exhaust System and Intake Parts
- Cobra exhaust system
- Air intake and filter housing
8. Seats and Comfort Accessories
- OEM Honda Fury seat
- Passenger seat
Why Buy Used Motorcycle Parts from Midwest Moto Parts?
At Midwest Moto Parts, we are committed to offering used motorcycle parts at competitive prices. Here’s why our customers trust us:
- Inspection: Every part is cleaned and inspected before listing.
- Affordable Prices: Get parts at a fraction of new dealer prices.
- Worldwide Shipping: We ship parts globally, ensuring riders everywhere can restore and repair their bikes.
- Expert Knowledge: With years of experience in the motorcycle salvage industry, we help customers find the right parts.
Order Your Honda Fury VT1300CX Parts Today!
If you need authentic Honda Fury parts, check out our growing inventory at Midwest Moto Parts. We update our listings daily as we continue disassembly. Don’t wait—once these parts are gone, they’re gone!
For any questions or special requests, feel free to contact us. We’re happy to help you find the exact part you need to keep your 2010 Honda Fury VT1300CX running strong!
